Product details
• All prices listed on this website are for hardware only. If setup or configuration services are required, please use the official LINE menu "Quick Access → Network Planning / Deployment" to submit your request.
📦 Return & Exchange Policy • Items must be brand new and kept in complete original packaging (including outer box, accessories, and manuals).
• Products that have been activated, configured, or show signs of use are not eligible for return.
• For returns not related to product defects, shipping costs are the responsibility of the customer. For defective products or shipping errors, round-trip shipping costs will be covered by our company.
• Refunds or replacements will be processed only after the returned item has been received, inspected, and approved.
• If there are special refund circumstances, please contact us directly so we can review and discuss the appropriate solution.
As our 100 Gigabit product family grows, the time has come to introduce a serious enterprise-level switch. A switch that is up for the challenge when the CRS504 port density is just not enough. Introducing the spectacular CRS518-16XS-2XQ!
With 2x 100 Gigabit QSFP28 ports and 16x 25 Gigabit SFP28 ports, this is the perfect cost-effective addition to any enterprise network or data center. And with dual-redundant hot-swappable power supplies and fans, you won’t have to worry about unnecessary downtime.
Here’s a real-life setup – similar to the one we’re using in our office:
At the top, you could place two flagship CCR2216 routers to provide the main connectivity and routing. Then a blazing-fast 100 Gigabit connection leads to three CRS518 distribution level switches. This is where all the magic happens. The CRS518 switches connect every access level device to the main network, deal with traffic filtering, and network policy enforcement. And they handle all that with grace and dignity – thanks to the fantastic Marvell Prestera Aldrin2 switch-chip. The same chip you’ve seen in our flagship CCR2216 that did wonders with L3 Hardware Offloading.
The 25-gigabit ports are backward compatible with 10 Gigabit and 1 Gigabit SFP devices. Mix and match as you need!
The two hot-swap power supplies support a high input voltage range: 100-240V. The board itself uses up to 45W of power, while the total maximum power consumption goes up to 77W with all the attachments. It can be a bit more power-hungry than the CRS504, but you would be too if you had 16x 25-Gigabit ports, wouldn’t you?
Our 100 Gigabit product family keeps growing: switches, routers, cables, and QSFP28 modules. If you want real speed and ultimate flexibility for the best price on the market – you want MikroTik!
Nothing can stop this switch: it supports VLAN (802.1Q, 802.1ad), L3 hardware offloaded routing, ACL, LACP, MLAG, Jumbo frames, IGMP/MLD snooping, and so on. Keep your RouterOS up to date and enjoy the real power of CRS!
產品規格 (Specifications)
| Product code | CRS518-16XS-2XQ-RM |
| Architecture | MIPSBE |
| CPU | QCA9531 |
| CPU core count | 1 |
| CPU nominal frequency | 650 MHz |
| Switch chip model | 98DX8525 |
| RouterOS license | 6 |
| Operating System | RouterOS v7 |
| Size of RAM | 64 MB |
| Storage size | 16 MB |
| Storage type | FLASH |
| MTBF | Approximately 200'000 hours at 25C |
| Tested ambient temperature | -40°C to 70°C |
電源規格(Powering)
| Number of AC inputs | 2 |
| AC input range | 100-240 |
| Number of PSU slots | 2 |
| Frequency (Hz) | 47-63 |
| Max power consumption | 95 W |
| Max power consumption without attachments | 45 W |
| Cooling type | 4 fans |
網路介面(Ethernet)
| 10/100 Ethernet ports | 1 |
光纖介面(Fiber)
| Number of 25G SFP28 ports | 16 |
| Number of 100G QSFP28 ports | 2 |
周邊介面(Peripherals)
| Serial console port | RJ45 |
| Number of USB ports | 1 |
| USB Power Reset | Yes |
| USB slot type | USB type A |
| Max USB current (A) | 1 |
其他(Other)
| PCB temperature monitor | Yes |
| Voltage Monitor | Yes |
原廠測試報告 (Performance Test Report)
| CRS518-16XS-2XQ-RM | |||||||
| Mode | Configuration | 1518 byte | 512 byte | 64 byte | |||
| kpps | Mbps | kpps | Mbps | kpps | Mbps | ||
| Switching | Non blocking Layer 2 throughput | 48772.8 | 592296.4 | 141000.9 | 577539.8 | 600000.0 | 307200.0 |
| Switching | Non blocking Layer 2 capacity | 48772.8 | 1184592.7 | 141000.9 | 1155079.7 | 600000.0 | 614401.0 |
| Switching | Non blocking Layer 1 throughput | 48772.8 | 600100.0 | 141000.9 | 600100.0 | 600000.0 | 403560.0 |
| Switching | Non blocking Layer 1 capacity | 48772.8 | 1200200.0 | 141000.9 | 1200200.0 | 600000.0 | 807120.0 |
| CRS518-16XS-2XQ-RM | QCA9531 all port test | ||||||
| Mode | Configuration | 1518 byte | 512 byte | 64 byte | |||
| kpps | Mbps | kpps | Mbps | kpps | Mbps | ||
| Bridging | none (fast path) | 37,4 | 454.2 | 82,8 | 339.1 | 162,5 | 83.2 |
| Bridging | 25 bridge filter rules | 33,8 | 410.5 | 47,8 | 195.8 | 75,6 | 38.7 |
| Routing | none (fast path) | 37,2 | 451.8 | 73,3 | 300.2 | 144,9 | 74.2 |
| Routing | 25 simple queues | 36,4 | 442.0 | 52,4 | 214.6 | 54,4 | 27.9 |
| Routing | 25 ip filter rules | 33,8 | 410.5 | 41,4 | 169.6 | 41,7 | 21.4 |
1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
3. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
The device is pre-installed with a licensed operating system and is ready for use without the need for a separate purchase. Free software updates are provided throughout the product lifecycle or for a minimum of five (5) years from the date of purchase.
